Keeping the bathroom clean and tidy is a challenge familiar to many households. As one of the most frequently used spaces in the home, it needs a lot of attention, especially around the bath and shower areas. The combination of moisture and warmth creates ideal conditions for mould growth. When it becomes embedded in the grouting between tiles, it can leave your entire bathroom looking grimy and unsanitary. After countless attempts at cleaning my tiles with disappointing results, I decided to seek some guidance from professionals who could advise on the most effective approach. Interestingly, white vinegar wasn't the top recommendation. Instead, many specialists suggested using another highly adaptable cleaning solution - hydrogen peroxide. This naturally occurring bleaching compound is entirely safe when used in low concentrations, and it works by dismantling mould's cellular structure on hard surfaces such as tiles, reports the Express . Alex Morrissey, founder of Best Roofers and property maintenance specialist, explained: "A dependable bleach and vinegar-free method is 3% hydrogen peroxide on the grout, left to dwell for 10 to 15 minutes before scrubbing with a stiff nylon brush and rinsing. "For stubborn staining, make a paste of bicarbonate of soda with 3% hydrogen peroxide, work it into the lines, leave it for 10 minutes, then scrub and rinse. Repeat as needed until the grey or black hue lifts." Nigel Bearman, a home cleaning specialist at Daily Poppins, championed hydrogen peroxide as 'the most effective' alternative to bleach for tackling mould. He cautioned: "Bleach can whiten the surface, but it doesn't always penetrate porous grout, so the mould often comes back just as quickly." Singing the praises of 3% hydrogen peroxide, which is available over the counter, he explained: "It works well because it penetrates the grout rather than just sitting on top." However, before beginning the cleaning process, it's crucial to prepare the area properly. Alex suggests this involves removing any lingering water, soap or other debris to achieve the best mould-free results. He explained: "Results are usually better when the soap film is stripped off first, because oxidisers can reach the mould rather than sitting on residue. Degrease with a mild bathroom cleaner or a few drops of washing-up liquid in warm water and rinse." Likewise, oxygen bleach powder - occasionally marketed as a laundry booster - can serve as an effective mould removal solution. Lee Keat, founder of Vapor Clean LTD, noted: "When mixed into a paste and worked into the grout lines, it breaks down organic staining without the aggressive fumes many people hate with bleach. Leave it on for around 15 minutes, scrub, then rinse well." Moreover, if you wish to stop mould from developing in the first place, there are two essential steps you should take. Brian Toward, bathroom specialist and CEO of Wholesale Domestic, advised: "Ventilation is important to tackle mould problems, so always use an extractor fan or open a window during after showers to reduce the humidity in the room. Also wipe down tiles, grout and sealant with a dry cloth to remove excess moisture after bathing or showering."
स्रोत: Walesonline Co Uk
